For the wave simulation of a Turbelle® electronic or stream 6105/6205/6305 including connecting cable. Y adapter 7092.34 can be used to synchronously operate two Turbelle® electronic. If the photo-electric cell 7094.05 (not included in the scope of delivery) is attached to the connecting port, the night-mode operation is activated automatically. Foodtimer: By the push of a button, the pumps can be stopped to enable feeding. After about eight to ten minutes, a restart is carried out automatically.
All Turbelle® pumps with driver can be controlled electronically. For this purpose extensive control accessories have been developed in order to be able to simulate various marine flow conditions in the aquarium.
Simple washing of waves / 7091 + 7095 By setting the pump capacity and by adjusting the pulse time, big and small waves can be produced like in natural wave conditions.
Sequential pump circuit / 7095 The four pumps are started up one after each other, which produces a swelling current. The time to the next pulse can be set.
Chance flow / 7095 Chance flow is generated by wave simulation and sequential pump circuit. In some reef zones (surf), this combination is important.
Simulation of tidal currents / 7095 The pump channels 1 and 2 are switched on or off alternately. The water flows through the reef from both sides at an adjustable switching time of up to 12 hours.
Operation in night mode / 7091 + 7095 The photo-electric cells can be used to lower the pumping power during the night. Like in a reef, small animals and plankton can rise in the aquarium to take the habitat of diurnal animals.
Foodtimer / 7091 + 7095 By the push of a button, the pump can be stopped during feeding. After eight to ten minutes, the system is started again automatically.
Moonlight / 7095 Moon simulation in reef aquariums with white LED light, adjustable to a moon phase of 29 days
.jpg)
